Vapcell S4 Plus Battery Charger and Battery Discharge Tester - Wholesale Discount
This product is eligible for discounts depending on how many you buy! See the table above for pricing at different quantities. You can purchase other products in the same category (batteries, chargers, or accessories) and it will add to the wholesale discount. Add some products to your cart to test! Please note that during special sales you may see no quantity pricing table above in which case the sale price is the price no matter the quantity.
New upgraded V3.0 of the Vapcell S4 Plus charger!
Vapcell S4 Plus Features:
- Independent slot charging
- Automatically recognizes battery type (Li-ion, Ni-Mh, Ni-Cd)
- Able to run capacity test
- Reverse battery and short circuit protection
- Temperature sensor to prevent overheating while charging
- Button top contacts for recessed flat top batteries
- Overcharge protection
- Activate and repair 0V lithium batteries
- Automatically calculates charging time
- Newly added storage mode
Specifications:
- Connector type: AC Wall Adapter
- Input voltage: DC 12V/5A
- Charge speed:
- Lithium Ion: .25A, .5A, 1A, 1.5A, 2A, 2.5A, 3A x 4
- Ni-Mh/Ni-Cd: .25A, .5A, 1A x 4
- Cut off voltage:
- Lithium Ion: 4.2V +/- 1%
- Ni-Mh/Ni-Cd: 1.48V +/- 1%
- Battery chemistry: Lithium Ion (IMR/INR/ICR), Ni-Mh, Ni-Cd
- Common battery sizes:
- Lithium Ion: 10340, 10440, 14500, 16340, 16650, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 21700, 22650, 26500, 26650, 20650, 22500, 25500
- Able to charge protected 20700 and 21700 size cells
- Ni-Mh/Ni-Cd (1.48V): AAAA, AAA, SC, C
In the Box:
- Vapcell S4 Plus charger
- DC Wall Adapter
- Manual
- Reviews
- Questions
STILL BUGGY
Unable to complete a capacity test. It will charge and discharge the battery but then it in a matter of 30 to 40 seconds the percentage just counts up to 100% and the charger stops. This was a reported problem when the charger was first released and the "upgraded" version still has the same problem. Plus the charger chooses the discharge rate, not you. As you see in the photo it chose 500mA to discharge this new freshly charged Molicel P42A that shows a 20ohm resistance value even though I selected 1 amp in manual mode. The low capacity reading seems legit because my Opus had an even slightly lower reading. I left the charger sit for over two and a half hours and the voltage only rose by 0.2v during that time. Both the slots 1 and 4 have this problem. I did not try slots 2 and 3 because those 2 slots are have a maximum 500mA discharge rate. But it is capable of charging 4 cells simultaneously at 1.5 - 2 amps without breaking a sweat, even though it can charge 4 cells at 3 amps, I'm not comfortable pumping 3 amps into my cells. And it has very long slots for protected 21700 cells. Just be sure you can live with its bugs and limitations.
Vapcell S4 Plus Battery Charger (now in South Africa!)
Excellent little charger. Enjoy the Repair and CapacityTest utilities. I would highly recommend it to anyone wanting to maintain Li-Ion cells. (have even used it to charge Panasonic CGA103450 'flat pack' cells).
Best o the best
Excellent and awesome 👌
VAPCELL BATTERY CHARGER
Wow! Does everything but wash dishes!!! A very good charger indeed!
Runs great
Have only used this for a couple of weeks now, and only used it on the 'auto' mode so far. But have used it A LOT. 14500's, 18650's and 21700's. Flat & button, unprotected and protected. Even the biggest 21700 batteries fit without issue.
We Also Recommend
