Protected LG MJ1 18650 Battery Genuine & Tested - 10A 3500mAh - Button Top - Wholesale Discount
The following quantity discounts will be applied after adding the products to your cart.
Remember that adding other products in the Battery category to your cart will stack to a higher discount!
The new LG INR18650MJ1 3500 mAh is a really new 18650 battery cell that can handle fairly high drain applications (10A) while offering a massive 3500mAh. It's one of the best batteries we offer for high discharge flashlights or other devices that need a high capacity but medium discharge protected battery. The protected NCR18650GA is its only real competitor and is a good alternate choice as well. As always we've done extensive testing to be sure they're real so you can be confident you've got the real thing.
These are manufactured with a very high quality Seiko PCB with AO MOSFETs for 12-13A high current cutoff (most PCBs will not allow this much current). This protection circuit protects the battery from mishandling, overcharge, or overdischarge while allowing the battery to do its job properly.
The cell is made by LG Chem. Our company then adds the Seiko PCB along with the button top in an ISO certified factory to all safety standards. A clear wrap is put over the top to hold it together while still showing the LG MJ1 wrap underneath.
- Max Continuous Discharging Current: 10A
- Typical Capacity: 3500 mAh (3400mAh minimum)
- Style: BUTTON top
- Dimensions: 69.6mm length (±0.3mm) x 18.6 mm diameter (+0.1 / -0.3 mm)
- Recommended discharge cut-off voltage: 2.5V
- Voltage: 3.6V
- Full Charge Voltage: 4.2V
- Protected with Seiko PCB with AO MOSFETs for 12-13A high current cutoff
- Origin: South Korea, button top made in China
Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for mistreated batteries.
We Also Recommend